Ventair · Sahara range
Sahara Fan Heat Bathroom Unit
Low-profile bathroom unit combining fan-forced heat, a cooling fan and exhaust, available as a 4-in-1 with LED light or a 2-in-1 without.
- IP ratingIPX4
Product code SAH31BL
See it in our Albury showroom
Open Monday to Saturday
Cnr Dean & David Streets · Get directions
- Advice on sizing, colour and installation
- Local back-up after you buy
About the Sahara Fan Heat Bathroom Unit
The Sahara is Ventair's top bathroom unit and uses fan-forced heat rather than heat lamps, so it warms the whole room instead of just the spot under the ceiling. It also runs as a plain cooling fan in summer and has a strong exhaust to pull steam out before it turns into condensation and mould. Choose the 4-in-1 with a 20W LED light panel if the heater sits in the main light position, or the 2-in-1 if you already have downlights. The slim rectangular fascia comes in matte black or white to suit modern bathrooms.
Featured in the Ventair Bathroom Catalogue, page 6.
- Fan-forced heat with low and high settings (1100W/2000W)
- Fan cool mode for warmer months
- 380m3/h air extraction for steam and moisture control
- 4-in-1 model adds a 20W LED light panel (1500lm)
- Side ducted, IPX4 rated
- Matte black or white fascia
Specifications
- Brand
- Ventair
- Range
- Sahara
- Type
- Bathroom heater and exhaust fan
- Fascia size
- 540 x 376mm
- Exhaust power
- 55W
- Air delivery
- 380m3/h
- Fan heat
- 1100W / 2000W
- Recommended minimum install depth
- 200mm
- IP rating
- IPX4
- Dimensions
- 540 x 376mm fascia, 192mm body height
- Warranty
- 5 years
Options & product codes
| Code | Model | Colour |
|---|---|---|
| SAH31BL | 4-in-1 (with LED light) | Matte Black |
| SAH31WH | 4-in-1 (with LED light) | White |
| SAH21BL | 2-in-1 (no light) | Matte Black |
| SAH21WH | 2-in-1 (no light) | White |
